{"product_id":"bmw-n51-n52-msv80-multi-map-tune","title":"BMW N51\/N52 MSV70\/MSV80\/MSV80.1 Multi-Map Tune","description":"\u003cp\u003e\u003cstrong\u003eAfter ordering, email \u003ca href=\"mailto:help@povertybuilt.com\"\u003ehelp@povertybuilt.com\u003c\/a\u003e with your order number to confirm your setup and map selections.\u003c\/strong\u003e\u003c\/p\u003e\n\u003csection aria-labelledby=\"which-ecu\"\u003e\n\u003ch2 id=\"which-ecu\"\u003eFitment first: which ECU do I have?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which ECU you have? Send David your VIN at \u003ca href=\"mailto:help@povertybuilt.com\"\u003ehelp@povertybuilt.com\u003c\/a\u003e and we will help identify it.\u003c\/strong\u003e If you already have an ECU identification screenshot, include it. Let us know if the engine or ECU has been swapped.\u003c\/p\u003e\n\u003cp\u003eOur N51\/N52 multi-map package supports \u003cstrong\u003eMSV70, MSV80 and MSV80.1\u003c\/strong\u003e. \u003ca href=\"\/blogs\/how-tos-for-tuning-bmws\/identify-bmw-msv70-msv80-msv80-1-ecu\"\u003eRead the simple ECU identification guide\u003c\/a\u003e, including how to check your VIN on RealOEM.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cstrong\u003eThree switchable maps for $380. Just $100 more than our $280 single-map tune.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Poverty Built \u003cstrong\u003eN51\/N52 Multi-Map Tune\u003c\/strong\u003e gives your BMW three selectable tune profiles on the factory \u003cstrong\u003eMSV70, MSV80 or MSV80.1 ECU\u003c\/strong\u003e. Choose Stage 1, 2, or 3 for each map, then set pops and bangs Off or On, with your preferred intensity for each map where they are enabled.\u003c\/p\u003e\n\u003cp\u003eKeep the same stage across your maps with different exhaust behavior, or choose a different stage for each. All three maps are configured around your car's hardware and fuel.\u003c\/p\u003e\n\u003cp\u003eOnly need one setup? The \u003cstrong\u003e$280 single-map tune\u003c\/strong\u003e is available for \u003ca href=\"\/products\/e6x-e9x-e87-e89-n52-msv70-tune\"\u003eMSV70\u003c\/a\u003e or \u003ca href=\"\/products\/e6x-e9x-e87-e89-n52-msv80-tune\"\u003eMSV80\/MSV80.1\u003c\/a\u003e. You can choose that without buying the multi-map package.\u003c\/p\u003e\n\u003ch2\u003eBuild your three maps\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSelection\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMap 1\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMap 2\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMap 3\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStage\u003c\/th\u003e\n\u003ctd\u003eStage 1, Stage 2, or Stage 3\u003c\/td\u003e\n\u003ctd\u003eStage 1, Stage 2, or Stage 3\u003c\/td\u003e\n\u003ctd\u003eStage 1, Stage 2, or Stage 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePops and bangs\u003c\/th\u003e\n\u003ctd\u003eOff, or On with your preferred intensity\u003c\/td\u003e\n\u003ctd\u003eOff, or On with your preferred intensity\u003c\/td\u003e\n\u003ctd\u003eOff, or On with your preferred intensity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIgnition-cut style (if requested)\u003c\/th\u003e\n\u003ctd\u003eFixed-RPM two-step or rolling RPM hold\u003c\/td\u003e\n\u003ctd\u003eFixed-RPM two-step or rolling RPM hold\u003c\/td\u003e\n\u003ctd\u003eFixed-RPM two-step or rolling RPM hold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eIgnition-cut choices:\u003c\/strong\u003e fixed-RPM two-step uses a target set when the map is prepared; rolling RPM hold captures the RPM when activated. Tell us which style you want on each map where you request ignition cut. \u003ca href=\"\/blogs\/how-tos-for-tuning-bmws\/n51-n52-msv80-multi-map-switching-explained#two-step\"\u003eRead how the two styles work\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor example, choose the same stage for all three maps with different pops-and-bangs intensities, or use different stages across the maps. Each map gets its own selections.\u003c\/p\u003e\n\u003ch2\u003eChoose your stages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 1 — OEM+:\u003c\/strong\u003e response, smooth power delivery, and factory-like driving character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 2 — Performance:\u003c\/strong\u003e a more assertive naturally aspirated calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 3 — Maximum N\/A:\u003c\/strong\u003e our most comprehensive naturally aspirated preset for this platform.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTell us your installed parts and fuel, then choose the driving character you want for each map. Send the three map selections with your order number to \u003ca href=\"mailto:help@povertybuilt.com\"\u003ehelp@povertybuilt.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBMW N51\/N52 engines with MSV70, MSV80 or MSV80.1.\u003c\/strong\u003e The file is prepared for your car's ECU and configuration.\u003c\/p\u003e\n\u003ch2\u003eWhat's included for $380\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-map functionality with three selectable tune profiles in total.\u003c\/li\u003e\n\u003cli\u003eStage 1, 2, or 3 for each map.\u003c\/li\u003e\n\u003cli\u003ePops and bangs Off or On, with independently chosen intensity for each map.\u003c\/li\u003e\n\u003cli\u003eA Poverty Built calibration package configured for your car.\u003c\/li\u003e\n\u003cli\u003eFlashing and map-selection instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to order\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eOrder the multi-map package.\u003c\/li\u003e\n\u003cli\u003eEmail your order number, vehicle, hardware, transmission and fuel details to \u003ca href=\"mailto:help@povertybuilt.com\"\u003ehelp@povertybuilt.com\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInclude the stage and pops-and-bangs setting you want for each of Map 1, Map 2 and Map 3, including your preferred intensity where pops and bangs are enabled. If requesting ignition cut, include fixed-RPM two-step or rolling RPM hold for the relevant map or maps.\u003c\/li\u003e\n\u003cli\u003eReceive your calibration package and instructions by email after order review.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eDelivery and flashing\u003c\/h2\u003e\n\u003cp\u003eThis is a digital tune delivered by email. Flashing software, licenses, cables, and interfaces are sold separately unless your order includes them. Physical hardware ships separately.\u003c\/p\u003e\n\u003cp\u003eFollow the flashing and map-selection instructions supplied with your tune. Additional vehicle information or a file read will be requested if needed to prepare your order.\u003c\/p\u003e\n\u003csection id=\"flashing-equipment\"\u003e\n\u003ch2\u003eFlashing equipment for MSV70, MSV80 and MSV80.1\u003c\/h2\u003e\n\u003cp\u003eYou will need a Windows PC, compatible flashing software and cable, and stable battery support. Software licenses, cables and interfaces are purchased separately unless your order includes them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMSV70:\u003c\/strong\u003e Bimmer Tuning Tools lists \u003ca href=\"https:\/\/www.bimmertuningtools.com\/product\/msv70-quickflash\/\" target=\"_blank\" rel=\"noopener\"\u003eMSV70 QuickFlash\u003c\/a\u003e for this ECU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMSV80\/MSV80.1:\u003c\/strong\u003e Bimmer Tuning Tools lists \u003ca href=\"https:\/\/www.bimmertuningtools.com\/product\/msv80-quickflash\/\" target=\"_blank\" rel=\"noopener\"\u003eMSV80 QuickFlash\u003c\/a\u003e for these ECUs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the linked tool pages for current PC requirements and BTT's \u003ca href=\"https:\/\/www.bimmertuningtools.com\/cables\/\" target=\"_blank\" rel=\"noopener\"\u003ecable compatibility guidance\u003c\/a\u003e. MSV80 QuickFlash is licensed to one computer, so activate it on the PC you will use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore buying software for your first multi-map installation, confirm the required tool with us.\u003c\/strong\u003e Follow the file-specific instructions supplied with your calibration.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eCan the maps use the same stage?\u003c\/h3\u003e\n\u003cp\u003eYes. You can use the same stage with different pops-and-bangs intensities, or choose a different stage for each map. Pops and bangs can also be switched off on any map.\u003c\/p\u003e\n\u003ch3\u003eDoes this include custom calibration?\u003c\/h3\u003e\n\u003cp\u003eThis is a configured preset package. One-off development, ongoing datalog review, and custom revisions are separate services.\u003c\/p\u003e\n\u003ch3\u003eWhat about MSV90 or N53 MSD81?\u003c\/h3\u003e\n\u003cp\u003eMSV90 and MSD81 for the N53 engine are in progress and not yet available. No release date is promised.\u003c\/p\u003e\n\u003cp\u003eFor an engine swap, custom build, or an existing tune you want to discuss, \u003ca href=\"\/pages\/contact\"\u003econtact Poverty Built directly\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/blogs\/how-tos-for-tuning-bmws\/n51-n52-msv80-multi-map-switching-explained\"\u003eRead the full N51\/N52 multi-map guide\u003c\/a\u003e for map switching, two-step, rolling RPM hold, stages, fuel and supporting mods. For general ordering and delivery questions, see our \u003ca href=\"\/blogs\/how-tos-for-tuning-bmws\/frequently-asked-questions-faq-about-poverty-built-tunes\"\u003etune FAQ\u003c\/a\u003e and posted service policies.\u003c\/p\u003e","brand":"Poverty Built","offers":[{"title":"Default Title","offer_id":67909788696864,"sku":"PB-MSV80-MULTIMAP","price":380.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/povertybuilt.com\/products\/bmw-n51-n52-msv80-multi-map-tune","provider":"Poverty Built","version":"1.0","type":"link"}