{"product_id":"f8x-m2c-m3-m4-s55-mevd17-2-g-preset-map-pack-stage-1-2-3","title":"F8X M2C\/M3\/M4 S55 MEVD17.2.G Tune — Choose Stage 1, 2 or 3","description":"\u003cp\u003e\u003cstrong\u003eBMW S55 Tune — Choose Stage 1, 2 or 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA platform-developed calibration file for supported vehicles using \u003cstrong\u003eMEVD17.2.G\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eSTAGE MATCHING\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe stage is part of the calibration specification.\u003c\/strong\u003e Choose the stage that matches the vehicle’s actual turbo, hardware, and fuel. Anything labeled \u003cstrong\u003eRequired\u003c\/strong\u003e must be installed and operating correctly. Order details such as VIN, ECU\/ROM, fuel, transmission, and requested supported exhaust behavior are collected by email after ordering and do not replace stage requirements.\u003c\/p\u003e\n\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2014–2019 BMW F80 M3\u003c\/li\u003e\n\u003cli\u003e2014–2020 BMW F82\/F83 M4\u003c\/li\u003e\n\u003cli\u003eBMW F87 M2 Competition and M2 CS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e The ECU software and unlock status must be confirmed before purchase. ECUs with later bootloader software can require a bench\/boot unlock before OBD flashing.\u003c\/p\u003e\n\n\u003ch3\u003eSTAGE 1 — STOCK-TURBO DAILY\u003c\/h3\u003e\n\u003cp\u003eFor a healthy vehicle using the factory turbocharger and stock or lightly modified supporting hardware. Focused on stronger response and torque while retaining predictable factory-style drivability.\u003c\/p\u003e\n\n\u003ch3\u003eSTAGE 2 — STOCK-TURBO PERFORMANCE\u003c\/h3\u003e\n\u003cp\u003eFor factory-turbo vehicles with the cooling and airflow hardware required for a higher-load map.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequired:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFactory turbochargers\u003c\/li\u003e\n\u003cli\u003eUpgraded charge-air cooling\u003c\/li\u003e\n\u003cli\u003eHigh-flow exhaust\/downpipe hardware where lawful\u003c\/li\u003e\n\u003cli\u003eLeak-free charge system and healthy high- and low-pressure fuel supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSTAGE 3 — SUPPORTED UPGRADED TURBO\u003c\/h3\u003e\n\u003cp\u003eFor specifically supported upgraded-turbo combinations. The turbo, fuel system, and ECU\/ROM must match an available Stage 3 file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequired:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA specifically supported upgraded-turbo combination\u003c\/li\u003e\n\u003cli\u003eStage 2 cooling and airflow hardware\u003c\/li\u003e\n\u003cli\u003eFuel-system capacity appropriate for the selected fuel and output\u003c\/li\u003e\n\u003cli\u003eA validated ECU\/ROM, turbo, and transmission combination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the exact Stage 3 combination has not been confirmed as supported, contact Poverty Built before ordering; Stage 3 is not a substitute for one-off development.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 2px solid #6f4aa8; border-radius: 12px; padding: 16px; margin: 0 0 24px; background: #f7f1ff;\"\u003e\n\u003ch2 style=\"margin-top: 0;\"\u003eDIGITAL TUNE DELIVERY\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe tune itself is delivered by email. No physical tune is shipped, and no tracking number is expected.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYour calibration file and applicable flashing instructions are sent to the email address used at checkout.\u003c\/li\u003e\n\u003cli\u003eChoose one Stage variant; this purchase includes one file for that stage. After ordering, email your order number and vehicle\/setup information to \u003ca href=\"mailto:help@povertybuilt.com\"\u003ehelp@povertybuilt.com\u003c\/a\u003e; see ordering details below.\u003c\/li\u003e\n\u003cli\u003eA full ECU read is not required unless Poverty Built requests one after reviewing the order.\u003c\/li\u003e\n\u003cli\u003eFlashing software, licenses, cables, and interfaces are separate unless this listing or your order specifically says they are included.\u003c\/li\u003e\n\u003cli\u003eIf your order also includes a cable or other physical hardware, that item ships separately. A shipping label means the package is being prepared; it is not in transit until the carrier receives it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eORDER INFORMATION\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eConfirm ECU\/ROM support, software, unlock status, and the exact flashing route and separate costs with Poverty Built before ordering if uncertain. Confirm Stage 3 combination support before purchase.\u003c\/li\u003e\n\u003cli\u003eSelect the Stage variant matching the actual hardware and fuel.\u003c\/li\u003e\n\u003cli\u003eAfter ordering, email your order number, full VIN, vehicle, engine, turbo\/hardware setup, transmission, fuel, and requested supported features to \u003ca href=\"mailto:help@povertybuilt.com\"\u003ehelp@povertybuilt.com\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInclude requested supported behavior in that email. ECU identification or a read is only needed if Poverty Built requests it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eWHAT YOU RECEIVE\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne Poverty Built calibration file for your selected stage and confirmed supported combination\u003c\/li\u003e\n\u003cli\u003eDelivery in the supported flashing format\u003c\/li\u003e\n\u003cli\u003eCorrection of a verified file issue if the delivered file does not match the submitted order\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChanges outside the options and revision allowance shown on this listing are separate work. Open-ended custom development and mechanical diagnosis are not included unless this listing explicitly says otherwise. A verified issue in the supplied file will be corrected through Poverty Built support; it is not treated as a request for new tuning work.\u003c\/p\u003e\n\n\u003ch2\u003eFLASHING OPTIONS\u003c\/h2\u003e\u003cp\u003eSupported maps may be delivered in an MHD-ready format for flashing through MHD, a Bimmer Tuning Tools S55 QuickFlash-compatible format, or another supported format for the customer’s preferred compatible flasher. If Poverty Built needs a file read for the ECU\/ROM, we will request it; a full read is not required unless asked.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/www.bimmertuningtools.com\/product\/s55-quickflash\/\" target=\"_blank\" rel=\"noopener\"\u003eBimmer Tuning Tools S55 QuickFlash\u003c\/a\u003e is currently $74 for a Single VIN license and requires a separately purchased ENET cable. For an eligible MHD route, the supported MHD flashing license and compatible interface are also separate. Software licenses, cables\/interfaces, and any required unlock are not included in the calibration price. Confirm the exact ECU\/software and supported route, including any separate unlock costs, before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eBEFORE FLASHING\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe vehicle must be mechanically healthy and free of unresolved fuel-pressure, ignition, boost-control, cooling, or drivetrain faults.\u003c\/li\u003e\n\u003cli\u003eUse the exact file for the VIN, ECU, ROM, turbo, hardware, and fuel.\u003c\/li\u003e\n\u003cli\u003eComplete any required ECU unlock before attempting the flash.\u003c\/li\u003e\n\u003cli\u003eMaintain stable battery voltage and a reliable connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIMPORTANT\u003c\/h2\u003e\n\u003cp\u003ePerformance varies with vehicle condition, fuel quality, hardware, climate, and drivetrain. No specific power figure is guaranteed. Safety-critical protection strategies remain enabled. The calibration is not intended to disable required emissions equipment or monitoring; the purchaser is responsible for complying with applicable laws.\u003c\/p\u003e","brand":"Poverty Built","offers":[{"title":"Stage 1","offer_id":52298404135200,"sku":"PB-S55-S1","price":300.0,"currency_code":"USD","in_stock":true},{"title":"Stage 2","offer_id":52298404167968,"sku":"PB-S55-S2","price":350.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3","offer_id":52298404200736,"sku":"PB-S55-S3","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/3512\/8608\/files\/pb-text-10577585799456-v2.png?v=1792972980","url":"https:\/\/povertybuilt.com\/products\/f8x-m2c-m3-m4-s55-mevd17-2-g-preset-map-pack-stage-1-2-3","provider":"Poverty Built","version":"1.0","type":"link"}