03–06 BMW E46 325i/330i MS45.1 N/A Tune — Stage 1/2/3

Configure the car first. Choose the stage second.

This is a platform-developed, naturally aspirated calibration configured for 2003–2006 BMW E46 325i and 330i models—including ZHP—using the M54 and Siemens MS45.1. The stage is not a parts list and does not tell you which modifications the car must have.

The Tune Configurator selections on this page tell us the engine configuration and requested ECU behavior. Select them to match the car exactly as it will be when the tune is flashed. Once those selections are correct, choose the stage based on the level and driving character you want.

HOW TO ORDER

1. Confirm the ECU. The chassis and model year are not enough by themselves. Your ECU identification/read must show MS45.1.
2. Complete every Tune Configurator selection accurately. Select the installed engine size and the requested EWS, SAP, DISA, rev-limiter, idle-speed, O2-sensor, burble/pops, and cable choices. These selections are instructions used to configure the order.
3. Choose the stage. The stage determines the level and character of the calibration—not which parts you are required to install.

Example: Headers, an intake, a manifold, or cams do not automatically make the car “Stage 2” or “Stage 3.” A car with common bolt-ons may still choose Stage 1, while a mostly stock car may choose Stage 3. Supporting modifications can improve the result, but they are recommendations—not stage requirements.

If the exact engine or requested configuration is not represented in the Tune Configurator, contact us before ordering instead of selecting the closest answer.

WHAT EACH STAGE MEANS

STAGE 1 — OEM+ | $180

The cleanest and simplest performance calibration. Stage 1 focuses on improved throttle response, optimized fueling, ignition and dual-VANOS behavior, and smooth factory-like drivability. Best for someone who wants the car to feel sharper without an aggressive personality.

Hardware reminder: Stage 1 does not mean “stock parts only.” Your Tune Configurator selections still tell us how the car should be configured.

STAGE 2 — PERFORMANCE | $220

A more assertive naturally aspirated calibration with additional performance optimization and stronger response than Stage 1. The file is configured around the engine and ECU behavior selected in the Tune Configurator.

Headers and an intake are not required to purchase Stage 2. They are common supporting upgrades, not the definition of the stage.

STAGE 3 — MAXIMUM N/A | $280

Our most comprehensive and aggressive naturally aspirated calibration for this platform. Stage 3 provides the highest available level of performance and behavior within Poverty Built’s staged calibration structure.

Cams, headers, manifolds, or other major upgrades are not automatically required. Select the engine and ECU options that match the actual car.

FITMENT

• 2003–2006 BMW E46 325i / 325xi / 325Ci / 325Cic — M54, MS45.1-equipped vehicles
• 2003–2006 BMW E46 330i / 330xi / 330Ci / 330Cic — M54, MS45.1-equipped vehicles
• BMW E46 330i ZHP — M54B30, MS45.1

This listing is for E46 vehicles identified as MS45.1. An MS43-equipped E46 must use the MS43 listing. Production year alone is not a reliable substitute for reading the ECU identification.

WHAT IS CALIBRATED

Depending on the stage and Tune Configurator selections, the calibration may include:

• Drive-by-wire throttle response
• Part-load and full-load fueling
• Ignition timing
• Dual-VANOS intake and exhaust cam behavior across RPM and load
• MS45.1 air/load, torque, DISA, and electronic-throttle behavior
• Idle-speed and rev-limiter preferences selected in the Tune Configurator
• Optional top-speed limiter changes where supported
• Optional EWS and supported closed-course/off-road SAP, O2, and diagnostic configurations when selected
• Burble/pops behavior when selected and supported

THE TUNE CONFIGURATOR IS PART OF THE ORDER

• Engine size: Select the engine actually installed. Use a swap choice only when it accurately describes the completed car.
• EWS, SAP, DISA and O2 setup: Select what the car will use when flashed.
• Rev limiter, idle and burbles: Select the behavior you want; do not assume the stage chooses these automatically.
• Flash cable: This is an optional hardware add-on and does not change the stage.

We build the order from the submitted selections. Incorrect choices can produce an incorrect file, so review the entire form before checkout.

BEFORE YOU ORDER

• The vehicle must be mechanically healthy before tuning. A calibration will not repair vacuum leaks, failing sensors, weak fuel delivery, ignition problems, VANOS/DISA faults, overheating, low compression, or other mechanical issues.
• Choose options for the car exactly as it will be driven with this tune.
• Changes made after the file is delivered may require purchasing an updated calibration.
• Power gains vary with engine condition, fuel quality, altitude, weather, and installed hardware.

WHAT YOU RECEIVE

• A Poverty Built platform-developed calibration configured around the Tune Configurator selections submitted with the order
• Flashing guidance for the supported MS45.1 process
• Correction of a verified tune-related issue if the delivered file does not match the submitted order

This product uses a proven calibration framework for supported combinations. It does not include one-off calibration development, repeated datalog review, ongoing revisions, or changes for later hardware updates. Builds that need an individualized process should use UNDSPTD. bespoke tuning.

FLASHING REQUIREMENTS

MS45.1 requires an MS45-capable flashing workflow. Use Bimmer Tuning Tools MS45 QuickFlash or the dedicated MS45 Flasher when it matches the delivered file and instructions. The official MS4X Flasher does not list MS45 support. Flashing software and compatible hardware are separate from the tune.

If Poverty Built needs a file read or additional ECU identification for your specific order, we will request it. You do not need to submit a full read unless asked. The customer is responsible for selecting the correct ECU, maintaining stable battery voltage, and using a reliable connection.

CLOSED-COURSE / OFF-ROAD USE

Any option that changes the operation or reporting of emissions-related equipment is intended only for lawful closed-course competition or off-road use. You are responsible for knowing and following all laws that apply to your vehicle and location.

POVERTY BUILT DISCLAIMER

By purchasing this product, you acknowledge that ECU tuning carries risk and that Poverty Built LLC is not liable for engine failure, drivetrain damage, flashing interruption, emissions violations, losses caused by incorrect customer selections, or indirect, incidental, or consequential damages. Results depend on vehicle condition, modifications, fuel, installation quality, and the accuracy of the information submitted with the order. The vehicle must be mechanically sound and properly maintained before and after tuning. Your purchase is also subject to the posted refund and service policies.

Helpful guides

• Confirm whether the car uses MS45
• Read what MS45 owners need to know about flashing
• Understand E46 burble and flame options