Poverty Built
M52TU/M54 (E39/E46/X3/Z3/Z4) - Poverty Built Aluminum Valve Cover
M52TU/M54 (E39/E46/X3/Z3/Z4) - Poverty Built Aluminum Valve Cover
Couldn't load pickup availability
FREE SHIPPING WITHIN THE UNITED STATES. International shipping is calculated at checkout.
CURRENT FULFILLMENT TIME:
Standard, unmodified covers ship in approximately one week.
Custom covers with 10AN fittings, powder-coated colors, or wrinkle coat ship in approximately 1½–2½ weeks.
INCLUDES NEW GASKETS AND INSTALLATION HARDWARE.
Replace the failure-prone factory plastic cover on your BMW M52TU or M54 with a durable aluminum valve cover prepared and quality-checked by Poverty Built in Florida. It is suitable for stock, naturally aspirated, and boosted builds and retains the factory oil-fill location.
Choose the Correct Coil Style
- Bolt down: Select this if each ignition coil is physically secured to the valve cover with mounting bolts.
- Pencil style: Select this if your engine uses the later push-in pencil-style ignition coils.
Check the coil style currently installed on your engine before ordering. This is especially important on engine-swapped cars or vehicles that may have had previous conversions.
What Is Included
- Aluminum M52TU/M54 valve cover
- New valve-cover gaskets
- Installation hardware
- Your selected coil-style configuration
- Any optional finish or crankcase-ventilation package selected above
Why Upgrade
Factory plastic M52TU and M54 covers can become brittle, crack, or warp after years of heat cycling. That can contribute to oil leaks, burning-oil smells, vacuum leaks, and drivability problems. The aluminum construction provides a stronger, more heat-resistant replacement and a cleaner long-term foundation for the engine bay.
These are sourced from our trusted Slovakian supplier—not the common mass-produced marketplace version—and each cover is inspected and assembled by Poverty Built before fulfillment.
Available Options
- Wrinkle coat: A textured performance-style finish.
- Powder coat: Select from the available colors shown above.
- Valve-cover fittings only: Dual 10AN fittings installed in the cover.
- Fittings and lines: Installed fittings plus two 10AN lines that you finish to suit your catch-can location.
- Complete catch-can package: Installed fittings, pre-cut and assembled lines, and a 750 ml baffled catch can.
Vehicle Fitment
- E46: 323i, 325i, 328i, 330i and 330Ci with M52TU/M54
- E39: 523i, 525i, 528i and 530i with M52TU/M54
- E53 X5: 3.0i with M54
- E83 X3: 3.0i with M54
- E85/E86 Z4: 2.2i, 2.5i and 3.0i with M54
- Z3: 2.2i, 2.5i, 2.8i and 3.0i with M52TU/M54
Fitment is determined by engine and coil style—not chassis alone. Confirm that your vehicle has an M52TU or M54 before ordering.
Complete Your Build
Pair the valve-cover upgrade with the correct Poverty Built calibration for your BMW. Find your tune by chassis, engine, or ECU.
